CS-1000Plus Laser scanner (with Autoscan-Stand)

Brand: Code Soft
Product Code: Scanners
Weight: 140.00g
In Stock

CODE SOFT CS Series is an auto-trigger, single line laser bar code scanner designed for decoding all standard 1D bar codes. CS Series can easily target the desired bar code and complete the data transmission accurately.


CODE SOFT CS Series is an auto-trigger, single line laser bar code scanner designed for decoding all standard 1D bar codes. With the State-of-art scanning technology embedded inside, the CS Series has a longer working range and wider scan field than a typical CCD scanner.

Standard features like Auto-trigger scanning mode which scanner will automatically convert to autoscanning mode when place on the auto-scanning stand without further programming setting, furthermore it gives you the user-replaceable cable to host and user friendly programming manual.

  • POS Retail Management System
  • Manufacturing
  • Automotive Industry
  • Chemical Industry
  • Pharmaceutical Industry
  • Textile Industry
  • Electronics Industry
  • Telecommunication
  • Transportation and Logistics
  • Health-care Industry
  • Utilities Application
  • Government Application

  • Auto-scanning mode
  • User-replaceable, single cable to host
  • Firmware updates via Flash ROM
  • Easy to program using the programming manual
  • Futuristic design, certainly catches your attention
  • Fast scanning speed and wider scanning field
  • Dust proof
  • Drop proof - Multiple 4.0 meters drops to concrete


CS series plus
Laser 650nm laser diode
Scannig Rate 100 scans / sec
Auto scanning With stand
Scanning angle ±60°, ±65°, ±42° (Skew, Pitch, Roll)
Min. element width 0.10mm (4mil)
Decode capability UPC-A, UPC-E, EAN-13, EAN-8, ISBN/ISSN, Code 39, Code 39 full ASCII, Code 32, Trioptic Code 39, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Codabar(NW7), Code 128, Code 93, Code 11(USD-8), MSI/Plessey, UK/Plessey, UCC/EAN 128, China Post, China Finance, GS1 DataBar (formerly RSS) variants
Input voltage 5 VDC ± 0.25V
Power 500 mW (Operating); 950 mW (Max.)
Current 100 mA (Operating); 190 mA (Max.)
Standby current <250uA
Indicator Beeper, LED
Interface supported Keyboard wedge, RS-232, USB Keyboard, USB virtual COM
Operating mode Hand-held, Auto-detection (Optional)
Dimensions (H*W*D) 9.5cm × 6.7cm × 15.4cm
Weight 168g, without cable
Cable Straight 2.0m
Connector type RJ-45 phone jack connector
Case material ABS + PC
Temperature 0° to 50°C (32° to 120°F), Operating; -40° to 60°C (-40° to 140°F), Storage
Humidity 5% to 95% (non-condensing)
Programming method Manual (reading special barcode)
Program upgrade Online
Decoding depth 5 mil: 40-110mm, 10 mil: 10-280mm, 13 mil: 15-315mm, 16 mil: 25-385mm, 35 mil: 145-630mm
Safety Laser safety: EN60825-1, Class 1; EMC: EN 55022, EN 55024; Electrical safety: EN 60950-1; Drop resistance: Multiple 4.0m (13.1 ft) drops to concrete; Protection class: IP50
Interfaces NOTE: Interface will be all USB only

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: